Xerox DocuMate 4790User’s Guide87PaperPortIn the One Touch Properties window, select PaperPort as the Destination Application for scanning.Supported file types—All image file formats are available when scanning to PaperPort. The sPDF andnPDF text file formats are only available when the OmniPage software or One Touch OmniPagemodule is installed. Please refer to Text Formats on page 72.Destination type—The PaperPort destination is classified as a “Document Management Link”. Tomake it available in the destination list, you must select Document management on the Options tabin the One Touch Properties window.• Click the Properties button to open the One Touch Link Properties for PaperPort. From this window,you can change the default folder location and options.On initial installation of One Touch, all scan configurations send the scanned document to thefolder selected in this window. When you create new configurations, the default settings will alsomatch what you have selected here. If you modify the options in an individual configuration,changing the options in this Link Properties window will no longer update to the configurationsyou modified.• Click the New, Copy, or Edit button to open the Scan Configuration Properties window. Click onthe PaperPort tab and use this window to set a configuration to scan to a different folder than theone selected in the Link Properties window.Changing the options in this window only affects the configuration you are creating or modifying.All other configurations will retain their settings for this destination.
