Xerox DocuMate 4790User’s Guide66Redaction Settings TabUse the options on the Redaction Settings tab to remove a specified area in the scanned image.Please refer to the technical note, at the end of this section, for information about how this settingworks with other options in the One Touch Scan Configuration you are modifying.Enable redaction—Select this option to enable redaction when scanning. You might use this option ifyou want to remove a logo or image that appears on each page that you are scanning. You can choosewhat color to fill in the redacted area in the scanned image, and set multiple areas. If you are scanningin Duplex mode, you can specify the area separately for the front and back side of the pages.Click Add to add a line item to the area list in this window. You can redact multiple areas from thescanned image, click the Add button again to continue adding line items to the list. Select an item inthe list then click the Remove button to remove the specified redaction area from the list.Side—Click once on the word Front to show the Side option list. If you are using a simplex (one-sided)scanner, only the Front option will be available. If your scanner supports duplex (two-sided) scanning,the options Front, Back, and Both will be available in the list.• Front—This is the Simplex side of the page. The area(s) specified for the Front will only apply tothe Simplex side of the page when scanning in Duplex. Therefore, if you scan 4 double-sidedpages, the resulting image file(s) will have redacted areas on pages 1, 3, 5, and 7.
