ScanningPhaser 6121MFP Multifunction PrinterUser Guide113Adding FTP Server Destinations from the MCCNote: If you have a USB connection to the printer, you can add FTP server destinations from theMCC and then upload them to your printer. However, you cannot scan to an FTP server unless youhave a network connection.To add FTP server destinations from the MCC:1. Ensure your printer is turned on and connected to your computer via a USB cable.2. From your computer, click Start > Programs > Xerox Office Printing > Phaser 6121MFP > MCC >Xerox Phaser 6121MFP MCC.3. In the MCC, click the Connect icon (first icon in the row).4. Click the Download icon (last icon in the row).5. In the navigation pane on the left, click the plus (+) sign next to Address Book to expand it, thenclick the plus (+) sign next to Speed Dial to expand it.6. In the navigation pane, click Scan To Server and then click the plus (+) sign next to it to expand it.7. In the navigation pane, select the next available Scan To Server entry number. In the right pane ofthe MCC window, click the New Contact button.8. In the Speed Dial List Scan To Server dialog box, complete the following information as needed:a. In the Server Description Name field, type a name for the FTP server.b. In the FTP Server Address field, type the FTP server address.c. If the destination folder is located in a sub directory of the FTP server’s root folder, type thename of the subdirectory in the Directory field.d. Change the color, format, resolution, and other settings as desired or leave the defaults.9. If you want certain people to receive an automatic email notification each time a scan is sent tothis FTP destination, then in the Email Notification section, do the following:a. Select the Enable Notification check box.b. Enter email addresses in the fields provided. You can specify up to ten addresses.10. If your FTP server requires authentication, then in the Authentication Method section, select thePrivate option and enter a user name and password in the corresponding fields.11. When finished, click OK.
