FaxingPhaser 6121MFP Multifunction PrinterUser Guide129Changing the Default Fax Receive OptionsTo change the default fax receive options:1. On the printer control panel, press the Fax button.2. Press the Down Arrow button to go to Fax Default Setup and then press the OK button.3. Arrow down to Receive Option and press OK.4. Set the features as desired, pressing OK after each selection. For a complete listing of options, seethe Receive Option section in the table Fax Default Setup Menu on page 154.5. To reset all settings back to their factory defaults, arrow down to Reset to Default? and then pressOK.All stored faxes will print.See also:Fax Default Setup Menu on page 154Receiving Faxes ManuallyFaxes can be received manually when a phone is connected to the printer and the same line is used forphoning and faxing.To set up receiving faxes manually:1. On the printer control panel, press the Fax button.2. Press the Down Arrow button to go to Fax Default Setup and then press the OK button.3. Arrow down to Receive Option and press OK.4. Arrow down to Receive Mode and press OK.5. Arrow down to Manual Receive and press OK. The Auto Receive indicator light on the control panelturns off.6. When the phone rings for an incoming fax, either pick up the phone or press the On Hook buttonon the left side of the control panel, then press the Start/B&W button.
