Scan and Fax SetupPhaser 6121MFP Multifunction PrinterUser Guide499. In the Authentication Method section, do one of the following:• If no authentication is required for your server, select No Authentication and then skip to step10 below.• If authentication is required, select the appropriate type. When you make a selection, the fieldsthat apply to that selection become enabled. Enter a valid user name and password in thecorresponding fields. If necessary, adjust the POP3 Server settings.10. At the bottom of the page, click Save Changes.You can now scan to an email address. For information on adding email addresses to the printer’saddress book, see Adding Email Addresses to the Address Book on page 108. For information onscanning to email, see Scanning to Email on page 93.Setting Up Scanning to an FTP ServerScanning to an FTP server requires a network connection. To scan to an FTP server, the printer must beable to communicate with the FTP server. This is enabled by default. Add FTP locations to the SpeedDial listings in CentreWare IS (available with Phaser 6121MFP/N or /D printer configurationsconnected to a TCP/IP network). For information, see Adding FTP Entries to the Address Book onpage 112.See also:Scanning to an FTP Server on page 97
