Control Panel MenusPhaser 6121MFP Multifunction PrinterUser Guide147Copy Default Setup MenuSpecial Copy Mode • ID Copy: Used for copying ID cards. The back and front of a documentare copied at full size onto one side of a single sheet of paper.• None (Normal Copy)• Poster Copy: The length and width of the copied document are eachenlarged 200% and are printed on four pages.• Clone Copy: Repeat copying; used to copy small documents multipletimes onto one piece of larger paper.Copy Default • Paper Default• Original Doc Type• Lighten/Darken• Collate Default• Sides Default• Preset UnitsFor details, see Copy Default Setup Menu on page 147.System Menu Provides accesses to the System Menu.Menu Item FunctionPaper Default(Phaser 6121MFP/N and /Dprinter configurations with theoptional 500-sheet feederinstalled.)Specifies the default tray to use as the paper source for copies. If you donot have Tray 2 installed (optional only for Phaser 6121MFP/N and /Dprinter configurations), this setting will not be available.Original Doc Type Specifies the type of content being copied from the original document:• Mixed, Fine/Mixed: Text with images/photos.• Photo, Fine/Photo: Photos only.• Text, Fine/Text: Text only.Lighten/Darken Specifies how light or dark the resulting copied image should be (also called“copy density”).Collate Default(Phaser 6121MFP/N and /Dprinter configurations only.)Specifies whether copy sorting is on or off.Sides Default(Phaser 6121MFP/N and /Dprinter configurations only.)• Off: Double-sided copying is off.• Long Edge Flip: Copied pages are printed so that they flip over alongthe long edge of the paper.• Short Edge Flip: Copied pages are printed so that they flip over alongthe short edge of the paper.Menu Item Contents
