ScanningPhaser 6121MFP Multifunction PrinterUser Guide96Scanning to a USB Flash DriveNote: These instructions can be used for all printer configurations.To scan a document to a USB flash drive:1. Position the document to be scanned on the document glass or in the auto document feeder asshown in Loading Documents for Scanning on page 92.Note: If you are scanning a two-sided document, use the document glass instead of the autodocument feeder because you will not be prompted to turn the page over if you use the autodocument feeder.2. Plug the USB flash drive into the USB port on the front of the printer.3. On the printer control panel, press the Scan button.4. Select the desired scan settings. See Adjusting Scanning Options on page 105.5. Press the desired Start button (Start/Color for color, Start/B&W for monochrome).The printer scans the document.6. If you are scanning from the document glass, at the “Next Page?” prompt, do one of the following:• If you are done scanning, press the appropriate Start button again to send the scan to itsdestination.• If you have more pages to scan, open the printer cover and turn the page over or position thenext page, then press OK. The document is scanned. When finished scanning pages, press theappropriate Start button to send the scan to the USB device.See also:Adjusting Scanning Options on page 105
