Control Panel MenusPhaser 6121MFP Multifunction PrinterUser Guide146Copy MenuThis section includes:• Copy Menu – Main on page 146• Copy Default Setup Menu on page 147To access the Copy Menu, press the Copy button on the control panel.Copy Menu – MainMenu Item ContentsTray Specifies the tray to use and the type and size of the paper in the tray whenmaking copies.Scale Specifies the image size of the copy in comparison to the original:• Manual: Enter the desired size.• Preset Sizes: Select from a list of preset sizes.Darken Specifies how light or dark the resulting copied image should be (also called“copy density”).Original Specifies the type of content being copied in the original document:• Mixed: Text with images/photos.• Fine/Mixed: Text with images/photos at higher resolution.• Photo: Photos only.• Fine/Photo: Photos only at higher resolution.• Text: Text only.• Fine/Text: Text only at higher resolution.Sides(Phaser 6121MFP/D printerconfiguration only.)Specifies the setting for 2-sided copying:• 1 to 1: Copying from one side to one side.• 1 to 2: Copying from two 1-sided pages to one 2-sided page:Long Edge Flip: Copied pages are printed so that they flip over alongthe long edge of the paper.Short Edge Flip: Copied pages are printed so that they flip over alongthe short edge of the paper.Collate(Phaser 6121MFP/N and /Dprinter configurations only.)Specifies whether the copied pages of multi-page documents are printed inorder and sorted by copy set.2-Up Copy(Phaser 6121MFP/D printerconfiguration only.)Enables two single-sided document pages to be copied and then printedonto one side of a single sheet of paper. The copies are reduced to fit onthe size of the selected output page.
