Phaser 6130 Color Laser Printer Service Manual 3-23Error Messages and CodesPDL ErrorError relating to Printer Command Language (PCL) has occurred.Applicable Chain Link■ Chain Link 016-720: PDL ErrorInitial Actions■ Cycle printer power.■ If the problem persists, follow the procedure below.3 Check the memory card capacity. Printthe printer Configuration Page: Menu> Information Pgs > Configuration.Is the memory capacity correct,including the optional memory?Go to step 4. Replace theImageProcessorBoard(page 8-60).4 Replace the memory card. Does theerror still occur?Replace theImageProcessor Board(page 8-60).Complete.Troubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map References■ Image Processor Board, PL8.1.9 “Map 3 - LVPS, Drive Motors, I/P Board, ACPower” on page 10-10“Controller” on page 10-31Troubleshooting Procedure TableStep Actions and Questions Yes No1 Check the print job.1. Print a small print job (like aWindows test print).2. Does the error still occur?Go to step 2. Complete.2 Reseat plugs and jacks on the ImageProcessor Board.Does the error still occur?Replace theImageProcessor Board(page 8-60).Complete.Troubleshooting Procedure Table (continued)Step Actions and Questions Yes No
