A-4 Phaser 6130 Color Laser Printer Service ManualReferenceFirmware Controller Update1. Down load the applicable files from the Xerox support web site.2. Ensure your appropriate downloading cable option (Ethernet or USB) isconnected.3. Reboot the printer.4. On your computer, locate the downloaded file. Open the Main directory.Double-click the Xeroxfwup.exe file.5. The xeroxfwup window with connection options is displayed. Select theappropriate downloading option (Network or USB). Click the Next button.6. The xeroxfwup window is displayed.a. For Network connection:■If your printer IP address is available, select the appropriate box.Click the Next button.■If your printer IP address in not listed, click the Add button. Enteryour printer IP address. Click the OK button. Select the box withyour printer IP address. Click the Next button.■On the printer Control Panel, messages are displayed fromReceiving data Port 9100 --> Writing... Port 9100 as the printerstarts updating the firmware.b. For USB connection:■The xeroxfwup window with the module number is displayed. Clickthe Next button.■On the printer Control Panel, messages are displayed fromReceiving data USB --> Writing... USB as the printer startsupdating the firmware.■A Completed message is displayed on the Control Panel.CautionDo Not reboot or turn off the printer. The printer will automatically reboot.7. When the process is completed, the following messages are displayed onthe printer Control Panel.■ Diagnosing... Xerox (TM) Print Cartridge■ Processing... Please wait... Calibrating... Ready8. On your computer, verify that the firmware update has been sent. Clickthe Next button. Click the OK button.9. Print the printer Configuration page (Menu > Information Pgs >Configuration) and verify the Firmware Version information.
