Phaser 6130 Color Laser Printer Service Manual 3-27Error Messages and CodesToner Cartridge ErrorsInsert Yellow/Cyan/Magenta/Black CartridgeThe printer does not detect the Toner Cartridge.Non-Xerox Toner, Invalid Yellow/Magenta/Cyan/BlackThe Toner Cartridge CRUM ID error indicates that a non-Xerox TonerCartridge is installed.Replace Yellow/Magenta/Cyan/BlackThe Toner Cartridge (Yellow/Magenta,/Cyan/Black) has reached its end of life.Yellow/Magenta/Cyan/Black LowThe Toner Cartridge (Yellow/Magenta,/Cyan/Black) is near its end of life.Initial Actions■ Check the Toner Cartridge life using CentreWare IS.■ Cycle printer power.■ If problem persists, follow the procedure below.Troubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map References■ Toner Cartridge (Y/M/C/K),PL5.1.21-24■ MCU Board, PL8.2.13■ “Map 1 - Transfer Unit, Control Panel,Imaging Unit, Dispenser, Fuser” onpage 10-8■ “Map 4 - Toner Dispenser Motors, HVPS,MCU” on page 10-11■ “Developer” on page 10-27Troubleshooting Procedure TableStep Actions and Questions Yes No1 Check the Toner Cartridge for correctinstallation. Is the Toner Cartridgecorrectly installed?Go to step 3. Go to step 2.2 Reseat the Toner Cartridge. Make surethe lock key is in the lock position.Does the error still occur?Go to step 3. Complete.
