Phaser 6130 Color Laser Printer Service Manual 3-57Error Messages and CodesLoad Manual FeedNo paper detected at Manual Feed Slot.3 Check the print data, paper (printmedia), and paper setting for thefollowing, and correct the incorrectitems:■ Is the paper suitable for the printdata?■ Does the paper setting match thepaper?■ Is the paper setting suitable for theprint data?Does the error still occur whenprinting?Go to step 4. Complete4 Insert a sheet of paper that is suitablefor the print data and the papersettings in the Manual Feed Slot.Does the error still occur whenprinting?Replace theMCU Board(page 8-59) andgo to step 5.Complete5 Does the error still occur whenprinting?Replace theImageProcessor Board(page 8-60).CompleteTroubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map ReferencesLeft Side Harness Assy (PL3.1.18)Photo Sensor (PL3.2.13)SSI Actuator (PL3.2.14)MCU Board (PL8.2.13)■ “Map 1 - Transfer Unit, Control Panel,Imaging Unit, Dispenser, Fuser” onpage 10-8■ “Map 4 - Toner Dispenser Motors, HVPS,MCU” on page 10-11■ “Xerographic” on page 10-24Troubleshooting Procedure TableStep Actions and Questions Yes No1 Check the paper for loading andsettingCheck that the paper in use meets theprint job requirementsDoes the error still occur afterreloading the paper and changing thepaper settings that the print jobrequires?Go to step 2. CompleteTroubleshooting Procedure Table (continued)Step Actions and Questions Yes No
