Phaser 6130 Color Laser Printer Service Manual 6-7Adjustments and CalibrationsParameter SettingThis function reads/writes the parameter values, errors, and life countervalues stored in the printer.NotePrint the parameter list from Service Mode > Parameter > Print beforechanging the registration value. The parameter list contains the parameterand life counter values currently stored in the engine.To access the Parameter list:1. Turn the printer power Off (if the printer is On).2. Simultaneously press the Up Arrow and Down Arrow buttons and turnon the printer.3. The Service Mode menu is displayed.4. Press the Up Arrow or Down Arrow button to find Parameter. Press theOK button.5. Select the appropriate item to change (i.e., Slow Scan KtoP). Press theOK button.6. Enter the appropriate range using the Up Arrow or Down Arrow button.Press the OK button.7. The new value “# *” is displayed.Note“*” = data has been saved8. Press the Cancel button to return to the Parameter menu.Parameter SettingItem Range DescriptionSlow Scan K to P -128 to 127 Sets the registration in the paper feedingdirection.Slow Scan 600 Y/M/C -30 to 30Fast Scan K to M, Y, C -128 to 127 Sets the registration in the scanningdirection.Fast Scan 2 K to M, Y, C -1 to 2Fast Scan M-Feed, Tray -30 to 30Life Counter — Reads the life counter and the printer.
