7. Performing the setup from the Printer Control PanelXerox Phaser 7907–23. Perform one of the following:• To advance through the menus, press the Menu button.• To view submenus, press the Item/Enter button.• To accept a displayed option, press the Item/Enter button.Top-level menusWhen the printer is not processing or printing a job, the control paneldisplays Ready or Power Saver Mode. To view the top-level menuchoices, including the following, press the Menu button.Select To specifySystem Setup System settings for the printer; set or change theadministrator password used to limit access to theSetup menus.Printer Setup Printer settingsPS Setup PostScript settings for the printerPCL Setup PCL settings for the printerI/O Port Setup Settings for the network and/or parallel connections tothe printerNetwork Protocol Setup Settings for the network protocolsNetwork Services Setup Settings for the printing servicesCheck and Print Print remaining copies or processed jobs stored on theprinter disk after first copy has been inspected.Print Pages from List The resident pages of the printer.Other Panel Language The Printer Control Panel language.Resets Job Log and all print queue clearance (ClearLog/Queues displayed)Formatting the hard drive (Format Disk displayed)Printer color calibration reset to factory settings (ResetColor displayed)Defaults of all modifiable settings (Restore Defaults)Restart of the printer (Restart Printer displayed)System Setup toNetwork Services SetupInformation about the printer and to set a password tolimit access to printer Setup menus.VisualCal Calibration of the printer color production.Color Adjustment Adjustment of the density and brightness of Dry Ink.
