Xerox Phaser 790 9–1Installing user software in aWindows 95/98 environmentUse the following instructions to install software and set up printingfrom Windows 95/98 systems. Ensure that your printer is properlyconnect and configured for your network. For details, refer to thechapters Connecting to the network and Performing the setup from thePrinter Control PanelUse the contents of this chapter as follows:• Depending on your configuration, use one of the following sectionsto install printer drivers and set up appropriate connections:• Parallel port printing• IPX/SPX printing• SMB printing• Specify printer options with the section Setting the printeroptions.• If necessary, refer to the section Installing additional software forWindows 95/98.All necessary files are included on the User Software CD.In addition to using the User Software CD, you can download printerdrivers from the printer to your workstation with the Installer WebTool(if the system administrator has enabled Internet access to the printer).You can then install the drivers from your workstation. For instructions,refer to the section Using the Installer WebTool in the chapter Usingthe Fiery WebTools. After you download the printer files, theinstallation process is identical to installing from the User Software CD.9
