23. Problem Solving Adjusting the color23-28 Xerox Phaser 7906. Repeat step 5 for each for the color rows, drawing circles around yourpreferred selections or recording a 9 or a 0 next to the row.7. For the 30% Match row, hold the sheet at arms length. Select the circlethat best matches the background and draw a circle around it.8. BLACK START 4 is displayed on the Printer Control Panel. Press theup and down arrows button to enter the number that corresponds to thevalue that you selected on the first row.Pressing the up arrow button increases the number displayed. Pressing thedown arrow button decreases the number.a. When the desired number is displayed, press the Item/Enterbutton. BLACK END 4 appears on the Control Panel.b. Use the up and down arrow buttons to enter the number thatcorresponds to the value that you selected on the next row.c. Press the Item/Enter button. CYAN START 4 appears on theControl Panel.9. Repeat step 8 for each of the color rows and for the 30% Match row.If you entered a 9 or a 0 for any row, VisualCal will generate another PrintLimits Page containing the adjustments from your previous selections.Perform step 8 again until you are able to select circles within the desired 1to 8 range.10. When all the values are entered and accepted by VisualCal, PRINTGRAYS YES is displayed on the Control Panel.2. Gray Balance Page1. Press the Item/Enter button. PRINTING GRAY BALANCE PAGE isdisplayed, and after a moment the page is delivered the Top OutputTray.a. Select the color patch that is most like the gray that surrounds thecolor patches.b. Circle your selection.
