14. Printing from the Windows workstationsXerox Phaser 790 14–195. Select the Paper Source, Layout, ColorWise, Image Qualityand Finishing print option bars to specify the appropriate settingsfor the print job.These print options are specific to the server and the printer. Theyoverride settings specified in Printer Setup, but can be overriddenfrom the Command WorkStation Properties dialog box or theFiery WebSpooler. For more information on these and other printoptions, refer to the chapter Print options.If you select Printer default, the job prints according to thesettings entered during Setup, or the default settings. Refer to thechapter Print options.Some options can also be set from an application (for example,Reverse Page Order or Collation). In these cases, use the driveroption to perform the function, rather than setting it from theapplication. The application may not set up the file properly forprinting on the Phaser 790 and may also take longer to process.6. Select OK in the Print dialog box.Setting print options for all PCL jobs (Windows NT 4.0)1. Select Start, Settings, and Printers.2. Right-click to select the Xerox Phaser 790 PCL printer icon andselect Document Defaults.3. Select the Fiery Printing tab.4. Specify the appropriate default settings for all print jobs asdescribed in the previous procedure.5. Select OK.
