14. Printing from the Windows workstationsXerox Phaser 790 14–15Saving files to print at a remote locationIf you do not have a Phaser 790 and are preparing final files to take toa service bureau or other location, select the Print to file checkboxand OK. Save the file to the appropriate location. For more informationabout printing to a file, refer to your Windows or applicationdocumentation.You can also print to the File port to create a file to download usingWebDownloader.Setting print options for a job with Windows NT 4.0You can print from Windows NT 4.0 using the Adobe PostScript printerdriver or PCL printer driver, both of which are included on the UserSoftware CD.Once you have installed the Adobe PostScript printer driver and PPDfile or the PCL printer driver and PDD file, you can specify printoptions.The procedures for setting options and printing are different dependingon which printer driver you use.With the Adobe PostScript printer driver, you can set options on a job-by-job basis or establish default settings for all jobs printed from yourcomputer to the Phaser 790.This section describes configuring print options for Windows NT 4.0using the PostScript printer driver and the PCL printer driver.Custom print options available from the PostScript and PCL printerdrivers are described in the chapter Print options.
