9. Installing user software in a Windows 95/98 environmentXerox Phaser 7909–12Setting up parallel port printing1. Ensure that the printer is configured for parallel port printing. Formore information, refer to the chapters Connecting to the networkand Performing the setup from the Printer Control Panel.2. To spool files directly to the printer, set Port Timeout in Secondsto 10. To print directly to the Phaser 790, set Port Timeout inSeconds to 5.Setting this option to 10 seconds ensures that spooling is notinterrupted due to timeout.3. At the workstation, perform the following to change the BIOSsettings:a. Restart the workstation and press the key indicated on themonitor as soon as the workstation starts up. You may haveto scroll through several screens to reach the parallel portsettings.b. Set Parallel Port Mode to ECP.c. Save the changed setting and exit.4. Select the Start, Settings, and Printers.5. Select the Phaser 790 printer icon and select Properties fromthe File menu.6. Select the Details tab. In the Print to the following port drop downlist, select LPT1: (ECP Printer Port).Check this selection carefully. It may read LPT1 (Printer Port), which is notequivalent to LPT1: (ECP Printer Port).If this box does not read LPT1: (ECP Printer Port), change theport setting now, as described in the section To prepare the portfor parallel port printing and then return to this step. You mayneed your Windows 95/98 system CD.
