7. Performing the setup from the Printer Control PanelXerox Phaser 7907–4To enter a new Password, use the up arrow button to scrollthrough characters and the right arrow button to move fromleft to right, from character to character. To delete acharacter, use the left arrow button. The password can beany combination of letters and numbers up to 16 characters.When you are finished entering the password, press theItem/Enter button. Enter the password again for verification.If you make a mistake, the system will prompt you to enterthe password again.Printer SetupThe Printer Setup options set the printer page description language(PDL), paper size, and ability to print under low Dry Ink conditions.1. Press the Offline button and press the Menu button until PrinterSetup is displayed.2. Press the Item/Enter button to display the following options.Enter information as required:• Page Desc Lang—PS/PCL/Auto. (Auto is the default.)Enter the default page description language for your printer.If you select Auto, the printer will automatically detect andinterpret the page description language used by the file.• Default Paper—Letter/A4. Use this option to specify thedefault paper size to use in printing. All information and testpages are printed on the default paper size.• Toner Low—Continue/Stop. (Continue is the default.)Specify the behavior of the printer when the Dry Ink (Toner)is low. Select Continue to print until there is no more Dry Inkor Stop to cease printing immediately until the Dry Ink hasbeen replaced.Replace Dry Ink soon after the Dry Ink Low/Replace [Dry Ink Color] messageis displayed.
