Windows 95/98 print drivers 3. Network SetupXerox Phaser 790 3-5Windows 95/98Before you begin1. Ensure that the Phaser 790 has been prepared for network printing.2. Ensure that you have the printer name, Apple Talk Zone (if applicable),and IP Address. These may be obtained from your system administratoror from the Configuration Page.In order to print the Configuration Page, perform the following steps:a. Press the Offline button on the Printer Control Panelb. Press the Menu button until the message Print Pages from List isdisplayed on the Printer Control Panel.c. Press the Item/Enter button in order to select Print ConfigurationPage.d. Press the Item/Enter again button in order to print the page.Installing the print driverThe following procedure provides the steps for installing the printer driver forparallel port printing. For detailed information about setting up IPX/SPXprinting or SMB printing, refer to Installing the user software in a Windows95/98 environment.1. Insert the User Software CD in your CD-ROM drive.2. Select the Start button, Settings, and Printers.3. Double-click the Add Printer and select Next.4. Select Local printer and Next.5. Select the Have Disk button.6. Perform one of the following:• If you are installing from the CD, select the CD-ROM drive (forexample, D:\) from the drop-down box and select the Browsebutton.• If you are installing from files you downloaded using the InstallerWebTool, type the name of your hard disk drive (for example, C:\)and select the Browse button.
