14. Printing from the Windows workstationsXerox Phaser 790 14–7Setting options and printing from Windows 2000After you have installed the Windows 2000 PostScript printer driverand PPD file, specify print settings for a particular job and print it.PCL printing is not supported for Windows 2000.You can install and use the PCL drivers and PDD files provided on the UserSoftware CD to print from Windows 95/98 and Windows NT 4.0 systems.Refer to the appropriate Installing user software chapters and Printingfrom Windows workstations for information on installing and printing withthe Windows 95/98 and Windows NT 4.0 drivers.To set print options and print from Windows 2000 using the PostScriptprinter driver:1. Select Print in your application.2. Select the Phaser 790, then set print options for the job byselecting Properties (if necessary) and the print option tabs.3. Select the Advanced button on the Layout or Paper/Quality tab todisplay the Advanced Options dialog box.4. Select a setting from the Paper Size drop-down list menu.5. Scroll to Printer Features and select the appropriate settings forthe print job.These print options are specific to the printer. They overridesettings in Printer Setup, but can be changed using the CommandWorkStation. For information about these options and overrides,refer to chapters Introduction to the Command WorkStation.As you select print options, incompatible print settings aredisplayed with a caution icon next to their names. If you specifyincompatible print settings the Incompatible Print Settings dialogbox is displayed. Follow the on-screen instructions to resolve theconflict.
