Cleaning the InteriorWarning• Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If a sheet ofpaper is wrapped around the heat roller, do not try to remove it immediately. Power off the printerimmediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the printer hascooled.• If you spill any toner in the printer, remove the toner using a moist cloth. Never use a vacuum cleanerto remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printerregularly. Clean the printer interior whenever you replace the drum cartridge.After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closingthe printer covers and doors.• Remove any remaining pieces of paper or debris. For more information, refer to Clearing Paper Jams.• Remove any dust with a dry, clean cloth.Cleaning the LED Lens1. Open the Front Door of the printer.2. CautionUntil the Front Door is opened fully, the Toner Cartridge is locked in place. To prevent damaging theprinter, ensure that the Front Door is opened fully before attempting to remove the Toner Cartridge.Xerox® VersaLink® B605/B615 Multifunction Printer7-6User GuideMaintenance
