• The power cable is damaged or frayed.• A wall panel circuit breaker, fuse, or other safety device has been tripped.• Liquid is spilled into the printer.• The printer is exposed to water.• Any part of the printer is damaged.Telephone Line CordWarningTo reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger telecommunication linecord.Operational SafetyYour printer and supplies were designed and tested to meet strict safety requirements. These includesafety agency examination, approval, and compliance with established environmental standards.Your attention to the following safety guidelines helps to ensure the continued, safe operation of yourprinter.Operational Guidelines• Do not remove any trays when the printer is printing.• Do not open the doors when the printer is printing.• Do not move the printer when it is printing.• Keep hands, hair, neckties, and so on, away from the exit and feed rollers.• Covers, which require tools for removal, protect the hazard areas within the printer. Do not removethe protective covers.• Do not override any electrical or mechanical interlock devices.• Do not attempt to remove paper that is jammed deeply inside the printer. Switch off the printerpromptly and contact your local Xerox representative.Warning• The metallic surfaces in the fuser area are hot. Always use caution when removing paper jams fromthis area and avoid touching any metallic surfaces.• To avoid a tip hazard, do not push or move the device with all the paper trays extended.Ozone ReleaseThis printer produces ozone during normal operation. The amount of ozone produced is dependent oncopy volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.Install the printer in a well-ventilated room.For more information in the United States and Canada, go to www.xerox.com/environment . In othermarkets, please contact your local Xerox representative or go to www.xerox.com/environment_europe.1-3Xerox® VersaLink® B605/B615 Multifunction PrinterUser GuideSafety
