SolutionsSymptom2. Load the printed sheet into the tray with the printedside face down.3. Print five blank pages to remove debris from thefuser rollers.Spots or lines appear at regular intervals on the prints. 1. Print the Repeating Defects pages.At the control panel, touch Device > Support >Support Pages > Repeating Defects.2. To determine the cause of the problem, measurethe distance between the print defects.• 28 mm (1.1 in.): Drum Cartridge• 31 mm (1.2 in.): Drum Cartridge• 42 mm (1.7 in.): Drum Cartridge• 52 mm (2.0 in.): Drum Cartridge• 94 mm (3.7 in.): Drum Cartridge• 46 mm (1.8 in.): Transfer Roller• 82 mm (3.2 in.): Fuser• 94 mm (3.7 in.): Fuser3. If the repeating defects matches one of the dis-tances, replace the matching component.Copy and Scan ProblemsIf the copy or scan quality is poor, refer to the following table.If the problem persists, for online support information, go towww.xerox.com/office/VLB605_VLB615support.SolutionsSymptomsThere is debris on the CVT glass or the second-sidescanning lens assembly. When scanning, the paper fromthe document feeder passes over the debris on the glasssurfaces, resulting in lines and streaks. Clean all glasssurfaces with a lint-free cloth. For more information,refer to Cleaning the Scanner.Lines or streaks only present in copies made from thedocument feeder.There is debris on the document glass. When scanning,the debris creates a spot on the image. Clean all glasssurfaces with a lint-free cloth.Spots present in copies made from the document glass.8-25Xerox® VersaLink® B605/B615 Multifunction PrinterUser GuideTroubleshooting
