Obtaining the Printer IP Address from the Configuration ReportTo obtain the printer IP address from the Configuration Report:1. At the printer control panel, press the Home button.2. Touch Device > About > Information Pages.3. Touch Configuration Report.The IP address appears in the Connectivity section of the Configuration Report for IPv4 or IPv6.4. To return to the Home screen, press the Home button.Installation and SetupFor reference:• Installation Guide packaged with your printer• Online Support Assistant at www.xerox.com/office/VLB605_VLB615docsInstallation and Setup OverviewBefore you print, ensure that your computer and the printer are plugged in, powered on, and connected.Configure the initial settings of the printer, then install the print driver software and utilities on yourcomputer.You can connect to your printer directly from your computer using USB, or connect to a network usingan Ethernet cable or wireless connection. Hardware and cabling requirements vary for the differentconnection methods. Routers, network hubs and switches, modems, Ethernet cables, and USB cablesare not included with your printer and must be purchased separately. Xerox recommends an Ethernetconnection because it is typically faster than a USB connection, and it provides access to the EmbeddedWeb Server.For more information, refer to the System Administrator Guide atwww.xerox.com/office/VLB605_VLB615docs.Selecting a Location for the Printer1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relative humidity 10–85%.NoteSudden temperature fluctuations can affect print quality. Rapid heating of a cold room can causecondensation inside the printer, directly interfering with image transfer.2. Place the printer on a level, solid, non-vibrating surface with adequate strength to hold the weightof the printer. The printer must be horizontal with all four feet in solid contact with the surface.To find the weight for your printer configuration, refer to Weights and Dimensions.3. Select a location with adequate clearance to access supplies and to provide proper ventilation.To find the clearance requirements for your printer, refer to Clearance Requirements.4. After positioning the printer, you are ready to connect it to the power source and computer or network.Xerox® VersaLink® B605/B615 Multifunction Printer2-10User GuideGetting Started
