Configuring Google Cloud PrintGoogle Cloud Print allows you to print documents that are stored in the cloud without using a printdriver.Before you begin:• Set up a Google email account.• Configure the printer to use IPv4.• Configure Proxy Server settings as needed.To configure Google Cloud Print:1. At your computer, open a Web browser. In the address field, type the IP address of the printer, thenpress Enter or Return.NoteIf you do not know the IP address for your printer, refer to Finding the IP Address of Your Printer.2. In the Embedded Web Server, click Home > Connectivity.3. For Mobile Printing, click Google Cloud Print.4. To enable Google Cloud Print, click the Enable toggle button.5. Click OK.6. Restart the printer, then wait 2 minutes for the printer to connect.7. Refresh your Web browser, then for Mobile Printing, click Google Cloud Print.8. Click Printer Registration.9. Click Register.A printer registration page prints.10. To register the printer, in your Web browser, type the URL provided, or use your mobile phone to scanthe barcode.After the printer is registered, a confirmation status window appears.11. To access the Google Cloud Print feature, in your Google account, click Manage Your Printer.NoteThe default printer name appears in this format: Model name (MAC address).Installing the SoftwareBefore installing driver software, verify that the printer is plugged in, powered on, connected correctly,and has a valid IP address. The IP address usually appears in the upper, right corner of the control panel.If you cannot find the IP address, see Finding the IP Address of Your Printer.NoteIf the Software and Documentation disc is not available, download the latest drivers fromwww.xerox.com/office/VLB605_VLB615drivers.2-23Xerox® VersaLink® B605/B615 Multifunction PrinterUser GuideGetting Started
