- Touch Security, then select the security method that your wireless network uses.- Touch Enter Password, then enter the password for your wireless network.- Touch OK.5. To activate your Wi-Fi setting changes, press the Home button.6. At the prompt, touch Restart Now.7. After the printer restarts, wait two minutes, then to get the network information that includes theIP address, print a Configuration Report. For more information, refer to Printing the ConfigurationReport.Connecting to Wi-Fi DirectYou can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smartphone,using Wi-Fi Direct. Wi-Fi Direct is disabled by default.NoteWireless networking is available only on printers with the optional Wireless Network Adapter installed.Connecting with Wi-Fi Direct from Your Mobile DeviceTo connect with Wi-Fi Direct, follow the directions provided with your mobile device.Connecting to a Telephone LineWarningTo reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger telecommunication linecord.1. Ensure that the printer is powered off.2. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port onthe back of the printer.3. Connect the other end of the RJ11 cable to an operating telephone line.4. Power on the printer.5. Enable and configure the Fax functions.Initial Printer SetupBefore installing the printer software, verify that the printer is set up correctly. Setup includes enablingthe optional features and assigning an IP address for the Ethernet network connection. The installationwizard starts automatically the first time the printer is powered on. The installation wizard prompts thesystem administrator to configure the following settings:• Language• Network Connection• Proxy Server Setup• Date and Time• Measurements• LDAP Settings• Apps Setup2-21Xerox® VersaLink® B605/B615 Multifunction PrinterUser GuideGetting Started
