Printing using WindowsXerox® WorkCentre® 3215/3225User Guide1012-Sided PrintingYou can print on both sides of a sheet of paper. Before printing, decide how you want your documentoriented.Note: Some features may not be available on your model.• Printer Default: If you select this option, this feature is determined by the settings made on thecontrol panel of the printer.• None: The document is printed single-sided.• Long Edge: This is the conventional layout used in book binding.• Short Edge: This is the type often used with calendars.• Reverse 2-Sided Printing: The document is printed two-sided and the second side images arerotated 180 degrees.Paper TabUse the Paper Tab options to set the basic paper handling specifications when you access the printerproperties.CopiesThis allows you to choose the number of copies to be printed. You can select 1 to 999 copies.Paper Options• Original Size: This allows you to set the size of the original you are printing. If the required size isnot listed in the Size box, select Edit: When the Custom Paper Size Settings window appears, setthe paper size and select OK. The setting appears in the list so that you can select it.• Output Size: This allows you to set the size of paper required for printing.• Percentage: Use this option to change the contents of a page to appear larger or smaller on theprinted page. Enter the scaling rate in the Percentage input box.• Source: Use this option to select the paper tray required. Use Manual Feeder when printing onspecial materials like envelopes and transparencies. If the paper source is set to Auto Select, theprinter automatically selects the paper source based on the requested size.• Type: Set Type to correspond to the paper loaded in the tray selected. This will provide the bestquality printout. If printing Envelopes, ensure Envelope is selected.• Advanced: The advanced paper options allow you to select a different paper source for the firstpage of your document.• First Page: To have the first page printed on a different paper type from the rest of thedocument select the paper tray containing the paper required.• Source: Use this option to select the paper tray required. Use Manual Feeder when printingon special materials like envelopes and transparencies. If the paper source is set to AutoSelect: The printer automatically selects the paper source based on the requested size.
