Installation WizardXerox® WorkCentre® 3215/3225User Guide294. Press the up/down arrows to select Wi-Fi and press OK. This allows you to select the Wi-Fi setup.The options are:• Wi-Fi On/Off - allows you to turn Wi-Fi On or Off.• Wi-Fi Settings - allows you to use a Wizard to find the wireless network name automatically,or use the Custom feature to enter the SSID (Service Set Identifier) information manually.• WPS - allows you to select the Wi-Fi Protected Setup - the options are PBC or PIN.• Wi-Fi Direct - allows you to enable your wireless devices, such as notebooks, mobile phonesand PCs to establish wireless connectivity without the need for a wireless router, access point,or Wi-Fi hot spots.• Wi-Fi Signal - allows you view the strength of the wireless connection.• Wi-Fi Default - allows you to restore the default wireless settings.5. At the Wi-Fi On/Off menu, confirm that On is selected and press OK.6. Press the up/down arrows to select Wi-Fi Settings and press OK. The options are Wizard andCustom:a. Select Wizard - to have the machine find the WPS Settings automatically. If you select this,the Searching Wi-Fi Network screen displays and the machine searches the wireless network.• Select your wireless network and select OK.• Enter the wireless security information if requested and select OK.• Select Yes to apply the changes.b. Select Custom - to edit the SSID information manually. If you select this option, the SSIDscreen displays.• Enter the SSID using the keypad and select OK.• Select the Operation Mode and select OK.• Select the Encryption and select OK.• Select the WPA Key and select OK.• Select Yes to apply the changes.7. At the WPS menu, select PBC or PIN.8. At the Wi-Fi Direct menu, select On or Off, Device Name, IP Address, Group Owner, NetworkKey, and Status.9. At the Wi-Fi Signal menu, check to see if there is a Wi-Fi signal.10. At the Wi-Fi Default menu, select Restore if you want to restore defaults.
