IP FilteringXerox® WorkCentre® 3215/3225User Guide191IP FilteringOverviewThe IP Filtering is a security feature that allows you to control access to Internet Services. IP Filteringallows you to prevent unauthorized access by IP (Internet Protocol).The IP Filtering feature provides security to the machine, by allowing you to register the IP addressespermitted to communicate with the machine. This feature is used to prevent Raw TCP/IP Printing,LPR/LPD, HTTP, Fax to PC, IPP, SNMP, and Scan Manager for Network from unauthorized users.Enable IP Filtering1. At your Workstation, open the Web browser and enter the IP Address of the machine into theAddress bar.2. Press Enter.3. Click the Properties icon.4. If prompted, enter the Administrator User ID admin and Password 1111, and click Login.5. Click the Security link.6. Click the Network Security link.For IPv4 Filtering1. Select IPv4 Filtering.2. Select the IPv4 Filtering Enable check box.3. Enter the IP Address(es) to permit IP addresses to access the device.4. Enter the IP address or an IP address range by using an asterisk (*) as a wild-card character. Forexample:192.246.238.* is used to reference a subnet of host addresses192.246.* is used to reference a wider subnet of host addresses192.* is used to reference the widest subnet of host addresses5. The ability to filter on a port or ports is also supported. Enter the port information.6. Click Apply to accept changes.7. Click OK.For IPv6 Filtering1. Select IPv6 Filtering.2. Select the IPv6 Filtering Enable check box.3. Enter the IP Address(es) to permit IP addresses to access the device.
