Basic RegulationsXerox® WorkCentre® 3215/3225User Guide264ENERGY STARThe ENERGY STAR program is a voluntary scheme to promote the development and purchase ofenergy efficient models, which help to reduce environmental impact. Details on the ENERGY STARprogram and models qualified to ENERGY STAR can be found at the following Web site:www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=IEQThe Xerox WorkCentre 3225 Multifunction Printer is ENERGY STAR® qualified under the Energy STARProgram Requirements for Imaging Equipment.The ENERGY STAR and ENERGY STAR MARK are registered United States trademarks. The ENERGYSTAR Imaging Equipment Program is a team effort between U.S., European Union, and Japanesegovernments and the office equipment industry to promote energy-efficient copiers, printers, fax,multifunction machines, personal computers, and monitors. Reducing product energy consumptionhelps combat smog, acid rain, and long-term changes to the climate by decreasing the emissions thatresult from generating electricity.Xerox ENERGY STAR equipment is preset at the factory. Your printer will be delivered with the timer forswitching to Power Save Mode from the last copy/print out set at one minute. A more detaileddescription of this feature can be found in the Getting Started section of this guide.Power Consumption and Activation TimeThe amount of electricity a product consumes depends on the way the device is used. This product isdesigned and configured to enable you to reduce your electricity costs. After the last print, the deviceswitches to Ready mode. In this mode, the device can print again immediately. If the product is notused for a period of time, the device switches to a Power Saver mode. In these modes, to enablereduced product power consumption, only essential functions remain active.The product takes slightly longer to produce the first print after it exits Power Saver mode than it takesin Ready mode. This delay is the result of the system waking up from Power Saver mode and is typicalof most imaging products on the market.You can set a longer activation time or completely deactivate the Power Saver mode. This device cantake longer to switch to a lower energy level.To learn more about Xerox participation in sustainability initiatives, go to:www.xerox.com/about-xerox/environment/enus.html.For additional information on energy or other related topics, please visit:www.xerox.com/about-xerox/environment/enus.html. orwww.xerox.co.uk/about-xerox/environment/engb.html.
