Windows DriversXerox® WorkCentre® 3215/3225User Guide54Custom InstallationWith the custom installation, you can choose individual components to install.1. Make sure that the printer is connected to your computer and powered on.2. Insert the supplied CD-ROM into your CD-ROM drive.The CD-ROM should automatically run, and an installation window appears. If the installationwindow does not appear, select Start and then Run. Type X:\Setup.exe, replacing X with the letterwhich represents your drive and select OK.If you use Windows Vista, select Start > All Programs > Accessories > Run, and type X:\Setup.exe.Note: If the AutoPlay window appears in Windows Vista, select Run Setup.exe in Install or runprogram field, and select Continue in the User Account Control window.3. Select Install Software.4. Select your connection type and select Next. The Select Software to Install window displays.5. Select Custom from the Setup type dropdown box.6. Select the components to be installed and select Next.Note: When you select an option, a description of that option displays at the bottom of thescreen.7. Select Advanced Options if you would like to do any of the following:• Change the printer name• Change the default printer• Share the printer with other users on the network• Change the destination path where driver files and user guide files will be copied to. SelectBrowse to change the path.8. Select OK to continue, then select Next. The Copying Files window displays, and then theInstalling Software window.9. After the installation is finished, the Setup Completed window displays.10. Select Print a test page and select Finish.If your printer is connected to the computer, a Test Print page will be printed. If the Test Print operationis successful, refer to the Print chapter of this guide. If the print operation failed, refer to theTroubleshooting chapter of this guide.Wireless Printer (WorkCentre 3215NI and WorkCentre 3225DNI)When you connect your printer to a network, you must first configure the TCP/IP settings for theprinter. After you have assigned and verified the TCP/IP settings, you are ready to install the softwareon each computer on the network.1. Make sure that the printer is connected to your computer with a USB cable and powered on.2. Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, andan installation window appears.If the installation window does not appear, select the Start button and then Run. TypeX:\Setup.exe, replacing X with the letter which represents your drive and select OK.
