Network Installation: UnixXerox® WorkCentre® 3215/3225User Guide43d. Select OK to complete the form.9. Select Yes at the Configure HP UX Printers Subpanel screen. This screen may be obscured by theAdd Remote Printer/Plotter form.10. Select File: Exit.11. Select File: Exit Sam.12. Enter Exit to exit Super User mode.13. Test the queue created, by entering the command:lp -d queuename /etc/hosts14. Verify that the job prints at the machine.tty Method1. Enter su to access Super User mode.2. Enter sh to run the Bourne shell.3. Enter lpshut to stop the print service.4. Create the print queue by typing (on the same command line):lpadmin -pqueuename> -v/dev/null -mrmodel -ocmrcmodel -osmrsmodel -ob3 -orc-ormhostname -orplpWhere queuename is the name of the queue being created and hostname is the machinehostname.5. Enter lpsched to start the print service.6. Enter enable queuename to enable the queue to print to the machine.7. Enter accept queuename to the queue accepting jobs from the HP-UX workstation.8. Enter Exit to exit the Bourne shell.9. Enter Exit to exit Super User mode.10. Test the queue created, by entering the command:lp -d queuename /etc/hosts11. Verify that the job prints at the machine.
