Machine Digital Certificate ManagementXerox® WorkCentre® 3215/3225User Guide184Create a Certificate Signing Request1. In the Install/Create New Certificate area select Create Certificate Signing Request.2. Select Next.3. In the Certificate Signing Request (CSR) area:a. Enter a Friendly Name to identify the request.b. In the 2 Letter Country Code field enter the Country Code that represents the country inwhich the machine is located. The country code must be entered as a two-character ISO 3166country code.c. If required, enter details in the following fields:• State/Province Name• Locality Name• Organization Name• Organization UnitInformation entered for these options should describe the machine as per the X500 directoryscheme but can be any value which is meaningful to the customer to identify the machine.Note: The Common Name is taken from the machine’s IP Address/Host Name and Domain Name.d. Enter the E-mail Address of the Administrator who is responsible for the secure managementof the machine.4. Click Next.5. In the Certificate Signing Request (CSR) area, click Download.6. Send the downloaded file to your Certificate Authority for digital signing.7. When you receive the signed certificate back from the Certificate Authority, follow the steps belowto Install a CA Signed Device Certificate.Install a CA Signed Device Certificate1. In the Install/Create New Certificate area, select Install CA Signed Device Certificate.2. Select Next.3. In the Certificate Information area:a. Enter a Friendly Name to identify the certificateb. Enter the required Private Password and Confirm Password.c. In the CA Signed Certificate area, click Browse to find the certificate file on your computer.Select the file.d. Click Next.4. Select the Apply button to accept the changes.If prompted, enter the Administrator User Name (admin) and Password (1111), and select OK.5. If successful, the Current Status area displays a confirmation message.6. Follow the steps in Enable Secure Connection.
