Printing Using UnixXerox® WorkCentre® 3215/3225User Guide113Printing Using UnixPrinting FilesAfter installing the printer, choose any of the images, text, PS to print.1. Execute “printui ” command. For example, if you are printing “document1”use printui document1 command.This will open the Unix printer driver Print Job Manager in which the user can select various printoptions.2. Select a printer that has already been added.3. Select the printing options from the window such as Page Selection.4. Select how many copies are needed in Number of Copies.5. Press OK to start the print job.Configuring Printer PropertiesThe Unix printer driver Print Job Manager allows you to configure various print options using theprinter Properties option. The following hot keys may also be used: H for Help, O for OK, A for Apply,and C for Cancel.General Tab• Paper Size: Set the paper size as A4, Letter, or other paper sizes, according to your requirements.• Paper Type: Choose the type of the paper. Options available in the list box are Printer Default,Plain, and Thick.• Paper Source: Select from which tray the paper is used. By default, it is Auto Selection.• Orientation: Select the direction in which information is printed on a page.• Duplex: Print on both sides of paper to save paper.• Multiple pages: Print several pages on one side of the paper.• Page Border: Choose any of the border styles (e.g., Single-line hairline, Double-line hairline)Image TabIn this tab, you can change the brightness, resolution, or image position of your document.Text TabUse this tab to set the character margin, line space, or the columns of the actual print output.Margins Tab• Use Margins: Set the margins for the document. By default, margins are not enabled. The usercan change the margin settings by changing the values in the respective fields. Set by default,these values depend on the page size selected.
