62 Installations2-1．ServomotorMS series servomotors can be installed either horizontally or vertically. The service life ofthe servomotor can be shortened or unexpected problems might occur if it is installedincorrectly or in an inappropriate location. Follow these installation instructions carefully.CAUTION1． The end of the motor shaft is coated with antirust. Before installing, carefully remove all of thepaint using a cloth moistened with paint thinner.2． Avoid getting thinner on other parts of the servomotor.2-1-1．Storage TemperatureStore the servomotor within -20~+60 ℃ as long as it is stored with the power cabledisconnected.2-1-2．Installation SiteMS series servomotors are designed for indoor use. Install the servomotor in environmentsthat satisfy the following conditions. Free of corrosive or explosive gases. Well-ventilated and free of dust and moisture. Ambient temperature of 0°to 50°C. Relative humidity (r.h.) of 20 to 80% with no condensation. Accessible for inspection and cleaning.2-1-3．ConcentricityPlease use coupling when connecting to machine; keep the shaft center of servo motor andmachine at the same line. It should be accord to the following diagram when installing theservo motor.Antirust
