Xinje DS2-20P2-AS User Manual
Also see for DS2 series: ManualUser manualManual
                                                                                                   | |
Contents
| 
284-4．Auxiliary FunctionUse the operate panel to do application in auxiliary function mode.Group No. ContentF0-** Check system information, display the system code and dataF1-** Auxiliary run mode, display the auxiliary run command and resultF2-** Set the motor codeF3-** Check the alarm information, clear the alarmF4-00 Reset parameters to default valueF5-00 External communication monitoring4-4-1．F0-XXFunction No. Description Function No. DescriptionF0-00 Motor Code F0-01 Servo SeriesF0-02 Servo Model F0-03 Produce Date: YearF0-04 Produce Date: Month F0-05 Produce Date: DayF0-06 Software Version F0-07 Hardware Version4-4-2. F1-XX1. Jog (F1-00)Make sure that the motor shaft is not connected to the machine before jogging!P3-04 JOG speedUnit Default Setting range Suitable mode Change Effective1Rpm 100 0~1000 JOG Servo OFF Immediately2. Trial Operation (F1-01)Make sure that the motor shaft is not connected to the machine before trialoperation!When servo drive is connected with non-original encoder line or power line, trialoperation must be run first to ensure that the encoder line or power line is connectedcorrectly.Set the display to F1-01, and press and hold ENTER key to enter trial operation mode.The operate panel displays:If correctly wired, the motor would rotate in 5 seconds in forward direction (fixed tocounter-clockwise), otherwise the motor would shock or viberate, raising an alarm forworse. In this case the power must be switched off immedietely and check the wiringagain.F1-00Press ENTERINCKeep Press ENTER ReverseForwardDEC |
Related manuals for Xinje DS2 series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine