No.(Addr.Hex) Name Description Values PageF6-64 toF6-71(3DF to3C8)ReservedReserved for Dynamic I/O Assembly Parameters.– –F7-01(3E5)<2> IP Address 1Sets the most significant octet of network static IP address. Default: 192Range: 0 to 255 –F7-02(3E6)<2> IP Address 2Sets the second most significant octet of network static IP address. Default: 168Range: 0 to 255 –F7-03(3E7)<2> IP Address 3Sets the third most significant octet of network static IP address. Default: 1Range: 0 to 255 –F7-04(3E8)<2> IP Address 4Sets the fourth most significant octet of network static IP address. Default: 20Range: 0 to 255 –F7-05(3E9) Subnet Mask 1 Sets the most significant octet of network static Subnet Mask. Default: 255Range: 0 to 255 –F7-06(3EA) Subnet Mask 2 Sets the second most significant octet of network static Subnet Mask. Default: 255Range: 0 to 255 –F7-07(3EB) Subnet Mask 3 Sets the third most significant octet of network static Subnet Mask. Default: 255Range: 0 to 255 –F7-08(3EC) Subnet Mask 4 Sets the fourth most significant octet of network static Subnet Mask. Default: 0Range: 0 to 255 –F7-09(3ED) Gateway Address 1 Sets the most significant octet of network Gateway address. Default: 192Range: 0 to 255 –F7-10(3EE) Gateway Address 2 Sets the second most significant octet of network Gateway address. Default: 168Range: 0 to 255 –F7-11(3EF) Gateway Address 3 Sets the third most significant octet of network Gateway address. Default: 1Range: 0 to 255 –F7-12(3E0) Gateway Address 4 Sets the fourth most significant octet of network Gateway address. Default: 1Range: 0 to 255 –F7-13(3F1) Address Mode at StartupSelect the option address setting method0: Static <3>1: BOOTP2: DHCPDefault: 2Range: 0 to 2 –F7-14(3F2) Duplex Mode SelectionSelects duplex mode setting.0: Half duplex forced1: Auto-negotiate duplex mode and communication speed2: Full duplex forcedDefault: 1Range: 0 to 2 –F7-15(3F3)Communication SpeedSelectionSets the communication speed10: 10 Mbps100: 100 MbpsDefault: 10Range: 10, 100 –F7-16(3F4) Communication LossTimeoutSets the timeout value for communication loss detection in tenths of a second.A value of 0 disables the connection timeout.Example: An entered value of 100 represents 10.0 seconds.Default: 0Min.: 0Max.: 300 –F7-17(3F5) EtherNet/IP Speed ScalingFactorSets the scaling factor for the speed monitor in EtherNet/IP Class ID 2AHObject. Default: 0Min.: -15Max.: 15 –F7-18(3F6) EtherNet/IP Current ScalingFactorSets the scaling factor for the output current monitor in EtherNet/IP Class ID2AH Object. Default: 0Min.: -15Max.: 15 –F7-19(3F7) EtherNet/IP Torque ScalingFactorSets the scaling factor for the torque monitor in EtherNet/IP Class ID 2AHObject. Default: 0Min.: -15Max.: 15 –F7-20(3F8) EtherNet/IP Power ScalingFactorSets the scaling factor for the power monitor in EtherNet/IP Class ID 2AHObject. Default: 0Min.: -15Max.: 15 –F7-21(3F9) EtherNet/IP Voltage ScalingFactorSets the scaling factor for the voltage monitor in EtherNet/IP Class ID 2AHObject. Default: 0Min.: -15Max.: 15 –B.5 E: Motor Parameters200 YASKAWA ELECTRIC TOEP YAIP1U 01B YASKAWA AC Drive - P1000 Quick Start Guide
