7.17 Display of SERVOPACK and Servomotor ID (Fn01E)7-297 Utility Functions (Fn)7.17 Display of SERVOPACK and Servomotor ID (Fn01E)This function displays ID information for SERVOPACK, servomotor, encoder, and option module connectedto the SERVOPACK. The ID information of some option modules (SGDV-OFA01A) is not stored in the SER-VOPACK. "Not available" will be displayed for these option modules.This function cannot be executed from the panel operator on the SERVOPACK.To use this function, the digital operator (JUSP-OP05A-1-E) or SigmaWin+ is needed.Refer toΣ-V Series User's Manual, Operation of Digital Operator (No.: SIEP S800000 55) for the operatingprocedure of the digital operator.The following items can be displayed.∗ If the option module is not connected, "Not connect" will be displayed after the module name.(1) PreparationThere are no tasks that must be performed before the execution.ID Items to be DisplayedSERVOPACK ID• SERVOPACK model• SERVOPACK serial number• SERVOPACK manufacturing date• SERVOPACK input voltage (V)• Maximum applicable motor capacity (W)• Maximum applicable motor rated current (Arms)Servomotor ID• Servomotor model• Servomotor order number• Servomotor manufacturing date• Servomotor input voltage (V)• Servomotor capacity (W)• Servomotor rated current (Arms)Encoder ID• Encoder model• Encoder serial number• Encoder manufacturing date• Encoder type/resolutionSafety Option ModuleID *• Safety Option Module model• Safety Option Module serial number• Safety Option Module manufacturing date• Safety Option Module ID numberFeedback OptionModule ID *• Feedback Option Module model• Feedback Option Module serial number (Reserved area)• Feedback Option Module manufacturing date• Feedback Option Module ID
