3.2 Connecting the Converter to the SERVOPACK3-213 Wiring and Connection3.2 Connecting the Converter to the SERVOPACK3.2.1 Connecting the ConnectorsConnect CN901 and CN103 on the SERVOPACK and converter as shown in the following figure.3.2.2 Interconnecting TerminalsUse the busbars that are provided with the converter to connect the P and N terminals between the SERVO-PACK and the converter.The busbars are different for different converter models.(1) SGDV-COA2BAA, -COA3ZDA ConvertersAttach the busbars as shown in the following figure.Note: The shapes of the ends of the busbars are different for the SERVOPACK and converter connections and for the P ter-minal and N terminal connections.SERVOPACKConverterCN901: I/O signal connector between the SERVOPACK and converterCN103: Control power supply input connectorI/O signal connection cable24-VDC control power supply cableAnalogCable Name Cable Model Cable Length DescriptionIO signal connection cable JZSP-CVI02-A4-E 0.4 m This cable connects the CN901 connectors onthe SERVOPACK and converter.24-VDC control powersupply cable JZSP-CVG00-A4-E 0.4 m This cable connects the CN103(CN104) con-nectors on the SERVOPACK and converter.
