28Basic OperationCommunicationHints• The number (one of 1-9) corresponding to the selected frequency band is displayed on the LCD.For the relationship between the numbers and the frequency bands, see the table shown on page23.• By default, the following frequencies are set.A-band: 145.000 MHz B-band: 433.000MHz• By default, the Auto mode is selected such that it is switched to the mode ideal for the selectedfrequency band.You can change modes by pressing and holding the M key over 1 second and then selecting “2TX/RX” “1 MODE” “5RX MODE” (See page 29).• For the relationship between frequency bands and reception frequencies, see the table on page 11.• Pressing the F key and then pressing the 4 key allows you to call the home channel of eachfrequency band (See page 40).Tuning in to a FrequencyTune in to your desired frequency using either of the following methods:(1) Turn the O knob to tune in to your desired frequency.(2) Enter a frequency directly using numeric keys. Turning the O knob to Tune in to a Desired Frequency1 Select the VFO mode.2 Turn the O knob to tune in to your desiredfrequency.Clockwise turn: The frequency increases.Counterclockwise turn: The frequency decreases.Hints Pressing the F key briefly and turning the O knoballows you to set frequencies in steps of 1 MHz. Entering a Desired Frequency Directly Using Numeric Keys1 Press the V key.The VOF mode is selected, allowing you to select a frequency.2 Enter your desired frequency using numeric keys.Example: To enter 145.520 MHz, press the followingkeys:14552Example: To enter 430.000 MHz, press the followingkeys:43V
