Yaesu FT1DR Operating Manual

Also see for FT1DR: Operating manual Instruction manual Technical supplement Instruction manual Quick manual

Contents

41Using the MemoryA Wide Variety of Memory FunctionsSplit MemoryTwo different frequencies, one for reception and other for transmission, can beregistered to a memory channel.1 Write a reception frequency into the memory.Remarks Write the reception frequency with reference to “Writing Data into Memories” above.2 Select a transmission frequency in the VFO mode.3 Press the F key more than 1 second.4 Turn the O knob to select a channel number.Select the channel number of which you registered a reception frequency.5 While pressing the p switch, press the F key briefly.When you recall the memory channel of which youregistered two different frequencies, one for reception andthe other for transmission, the @ icon is displayed on theLCD.Recalling a Memory ChannelRecall a registered memory channel in the following procedure:1 Press the V key.The Memory mode is selected, and the memory channelyou used last is displayed on the LCD.2 Turn the O knob to select a memory channel.Select the memory channel to use next.Remarks • You can directly recall a memory channel using numerickeys.To recall memory channel 15:15V• Pressing the F key briefly and turning the O knoballows you to skip channels quickly in step of 10 channels.3 Press the V key.The Memory mode is canceled, and the frequency selected in the VFO mode isdisplayed.Hints• Unregistered memory channels are skipped.• By default, the priority memory channel used as the priority channel for the dual receive functionwas set to the memory channel 1. “P” is displayed at the upper right of the memory channel number(See page 128).• The memory content can be transferred to the VFO of the operating band in the following procedure:Press the F key for 1 second. Press the V key. “OVERWRITE OK?” is displayed. Pressthe V key.• Selecting the Memory Only mode in the following procedure allows you to use only memorychannels.While pressing the V key, press the P key.To cancel the Memory Only mode, press the V key again while pressing the P key (See page 155).䠍䠐䠑䠊䠑䠌䠌䠍䠐䠑䠊䠑䠌䠌䠐䠏䠏䠊䠌䠌䠌䠐䠏䠏䠊䠌䠌䠌