75Communicating with a Specific Remote StationUsing the Tone Squelch FunctionChanging the Number of Times the Bell Rings1 Press the M key more than 1 second.The Set mode is selected.2 Turn the O knob to select “4 SIGNALING”.3 Press the M key briefly.4 Turn the O knob to select “1 BELL”.5 Press the M key briefly.6 Turn the A knob to select “SELECT”.7 Turn the O knob to select a number of times the bellrings.Remarks Default: OnceHint You can select the number of times the bell rings from among 1-20 and “continuous”.8 Press the M key more than 1 second.The selected number of times the bell rings is determined.9 Press the M key more than 1 second again.The Set mode is canceled.Calling Only a Specific StationNew Pager FunctionWhen using FT1DRs with your friends, specifying personal codes (each code iscomposed of two CTCSS codes) allows only a specific station to be called. Even if thecalled person is not near his or her FT1DR, the information on the LCD indicates that heor she has been called.ACBThree persons A, B, and Care using the FT1DRMr. C sends the personalcode of Mr. B.Only Mr. B is called.Well,call Mr. B.Int erm itt entt one