77Communicating with a Specific Remote StationUsing the Tone Squelch FunctionTurning on the New Pager Function1 Press the M key more than 1 second.The Set mode is selected.2 Turn the O knob to select “4 SIGNALING”.3 Press the M key briefly.4 Turn the O knob to select “11 SQL TYPE”.5 Press the M key briefly.6 Turn the O knob to select “PAGER”.7 Press the M key briefly.The new pager function is turned on.8 Press the M key more than 1 second.9 Press the M key more than 1 second again.The Set mode is canceled.Thus, you can “call” or “wait” a remote station using the new pager function.Calling a Specific Station1 Press the M key more than 1 second.The Set mode is selected.2 Turn the O knob to select “4 SIGNALING”.3 Press the M key briefly.4 Turn the O knob to select “11 SQL TYPE”.5 Press the M key briefly.6 Turn the O knob to select “PAGER”.7 Press the M key briefly.The new pager function is selected.8 Turn the O knob to select “4 SIGNALING”.9 Press the M key briefly.10 Turn the O knob to select “6 PAGER”.11 Press the M key briefly.12 Turn the A knob to select “CODE-TX”.13 Turn the O knob to select the code of the remote station.Select the first code of the remote station.Precaution Register the pager code of the remote station inadvance.14 Press the B key briefly.The cursor “” moves.15 Turn the O knob to select the code of the remote station.Select the second code of the remote station.PAG is displayed.