63Using the GPS FunctionBACK TRACK FunctionUsing the BACK TRACK Function1 Press the M key briefly.The BACK TRACK function screen appears.2 Turn the O knob and select “POINT L1” or “POINT L2”.3 Press the B key.Returns to the BACK TRACK function screen.4 Press the V key.The BACK TRACK function is activated.The saved position (destination) appears in the direction of thearrow within the circle.Walk forward so that the arrow stays pointing up on thescreen.When the distance (DST) to the saved position becomes “0.1 km”*, it will be indicatedby four beeps.* 100 m to 200 mWhen the distance (DST) to the saved position becomes “0.0 km”*, it will be indicatedby a short beep melody.* 0 m to 100 mWhen you reach the destination, the screen changes as shownon the right, it will be indicated by a short beep, and the LEDglows white.Description of the BACK TRACK Function ScreenPOINT: Displays the saved position (L1 or L2).DST: Displays the linear distance to the saved position.GPS: Displays the number of captured GPS satellites.Arrow in circle: Indicates the direction toward the savedposition.
