74Communicating with a Specific Remote StationUsing the Tone Squelch Function7 Turn the O knob to select a vibrator operation mode.Remarks Default: MODE1MODE1 The vibrator vibrates continuously.MODE2 The vibrator operates at long intervals.MODE3 The vibrator operates at short intervals.8 Press the M key more than 1 second.The selected vibrator mode is determined.9 Press the M key more than 1 second again.The Set mode is canceled.Notification of Call from a Remote Station by the BellBell FunctionCall from a remote station (reception of a signal containing a coincident tone or DCS)can be notified by the bell sound and the b icon blinking on the LCD.1 Press the M key more than 1 second.The Set mode is selected.2 Turn the O knob to select “4 SIGNALING”.3 Press the M key briefly.4 Turn the O knob to select “1 BELL”.5 Press the M key briefly.6 Turn the A knob to select “RINGER”.7 Turn the O knob to select “BELL”.When the tone squelch or DCS function is turned on, theb icon is displayed.8 Press the M key more than 1 second.The bell function is turned on.9 Press the M key more than 1 second again.The Set mode is canceled.Hint To turn off the bell function, select “OFF” in step 6.Hints• To use the bell function, turn on the tone squelch or DCS function.• The bell function cannot be used via the repeater.• The b icon is displayed when the bell function is turned on.Upon receipt of a signal from a remote station, the b icon blinks.
