10New Two-Tone CTCSS Pager FunctionWhen using FT3DR/DE transceivers with a group of friends, setting the Two-ToneCTCSS personal codes allows calling just the specific stations. Even when the personwho is called is not near the transceiver, the information on the LCD indicates that a callwas received.The new two-tone CTCSS pager feature does not operate in digital mode. Touch [MODE] tochange the communication mode to Analog FM mode or turn the AMS function ON.Using the Pager Function1. Touch [F MW] [SQTYP].If [SQTYP] is not displayed, touch [FWD →] to display [SQTYP] and then touch it.2. Rotate the DIAL knob to select the “PAGER”.3. Press the PTT switch to save the setting and return to normal operation.Setting the Code for Your StationSet the “pager code” to be called by other stations.1. Activate the pager function by referring to “Using the pager function” above.2. Touch [F MW] [CODE].If [CODE] is not displayed, touch [FWD →] to display [CODE] and then touch it.3. Rotate the DIAL knob to select “CODE-RX”.6 PAGERANS-BACK: OFFCODE-RX : 05 47CODE-TX : 05 474. Press the [DISP] key to move the “u” icon to the firstelement of the code.Rotate the DIAL knob to select the first element of thecode from 1 to 50.6 PAGERANS-BACK: OFFCODE-RX : 05 47CODE-TX : 05 475. Press the [DISP] key to move the “u” icon to thesecond element of the code.Rotate the DIAL knob to select the second element ofthe code from 1 to 50.The same code cannot be use for both elements.6 PAGERANS-BACK: OFFCODE-RX : 05 47CODE-TX : 05 476. Press the PTT switch to save the setting and return tonormal operation.