20Split MemoryTwo different frequencies, one for receive and another for transmit, may be registered toa memory channel.1. Register the receive frequency to a memory channelfirst.• For additional details on registering to a memorychannel, refer to the Operating Manual “Registering toMemory Channels”.2. Set the transceiver to the desired transmit frequency.3. Touch and hold [F MW].4. Rotate the DIAL knob to select the channel number thatthe receive frequency was registered to on step1.5. While pressing and holding the PTT switch, press the[M.WRITE] key.• The beep sounds and the split memory is saved.• While recalling the split memory, “ ” is displayed onthe LCD.Registering the receivefrequency.Registering the transmitfrequency.Recalling the split memoryWhile operating the split memory, touch [F MW] [REV], to reverse the transmit and receivefrequencies temporarily. When reversing the frequencies,“ ” will blink.
