Yaesu FT3DR Advanced Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

25Activating the Dual Receive (D.RCV) feature1. Set the frequency and communication mode to monitor continually.The monitor frequency may be set on the VFO mode, the memory channel mode orthe HOME channel mode.VFO Dual Receive VFO  Priority Memory ChannelMemory Channel Dual Receive Memory Channel  Priority Memory ChannelHOME Channel Dual Receive HOME channel  Priority Memory Channel2. Touch [F MW]  [D.RCV].• If [D.RCV] is not displayed, touch [BACK ←] to dis-play [D.RCV] and then touch it.• The dual receive function is activated and the follow-ing icon is displayed on the top left of the display.VFO Dual Receive： VDRMemory Channel Dual Receive：MDR (/DXX/dXX)*HOME Channel Dual Receive： HDR* In the memory bank, DXX is displayed, and in thememory bank where the bank link is set, dXX (XX isa bank number) is displayed.When a signal is received on the priority channel, the beep sounds, and the DualReceive function stops temporarily.The combination of the frequency bands and modes for the Priority Memory Channel andthe receiver monitor frequency can be easily changed. Dual Receive may be operated withthe AMS function ON.Setting the Dual Receive (D.RCV) Resume Conditions1. Press and hold the [DISP]  touch [SCAN]  [4 SCAN RESUME].2. Rotate the DIAL knob to select “DW”.3. Press the [DISP] key, and then rotate the DIAL knob to select the resume conditionafter halting in the Dual Receive function (default setting is “HOLD”).2.0 sec～10.0 sec The signal is received for the specified period of time, and thenthe Dual Receive resumes.The Dual Receive resume time may be set from 2 to 10 sec-onds at 0.5 second intervals.BUSY The signal is received until the signal fades out. Two secondsafter the signal fades out, the Dual Receive resumes.HOLD The Dual Receive stops and tuning remains on the current re-ceive frequency. (The Dual Receive does not resume.)4. Press the PTT switch to save the new setting and return to normal operation.Press and hold the [DISP] key  touch [SCAN]  [6 PRIORITY REVERT] is set to “ON”,press the PTT switch to transmit, without waiting for activity to appear on the prioritychannel. After transmitting, the transceiver receives the priority channel and Dual Receiveresumes after 5 seconds.